Analog inputs/outputs are supported

It supports multiple high-speed pulse outputs

PWM/PTO output mode is supported

Support motion axis group function and support 2D/3D linear interpolation motion

Multiple motion modes make it easy to drive servo drives

Supports 10/100MBase/RS485 interfaces

Support S7/PROFINET/PPI/MPI/freely programmable bus protocols

Specifications:

Input voltage: 110-240 Vac

Power consumption: <5W

Instantaneous current: <1A or less

Digital inputs: 12x24VDC

Digital output: DQ 8x24VDC

Analog input: Al 2x11 Bit

Analog output: AQ 1x12 Bit

Anti-interference performance: 1000Vp-p@2KHz

Dielectric Strength: 1,000 Vac, 20 mA Less than 1 minute (between power terminal and FG terminal)

Insulation resistance: 500 Vdc, 10 MΩ or more

International safety standard CE

Operating temperature: -10 ~ 60 °C

Storage temperature: -20 ~ 60 °C

Operating humidity: 10~90%RH (no condensation, wet bulb thermometer temperature: below 39°C)

Storage humidity: 10~90%RH (no condensation, wet bulb thermometer temperature: below 39°C)

Vibration resistance: IEC/EN61131-2 compliant

5~9Hz Single amplitude: 3.5mm

9~150Hz constant acceleration: 9.8m/s2

10 times each in X, Y, and Z axes (100 minutes)

Impact resistance: IEC/EN61131-2 standard, 147m/s2, 3 times each in X, Y and Z axes

Antistatic properties: Contact discharge± 6kV

Non-contact discharge: 8kV (according to IEC/EN61000-4-2, class 3)

Interface specifications: 10/100MBase Ethernet

RS-485 1200~1Mbps

SD card interface: eMMC2.0