ENET-MIT Features:

1. Built on the 35mm rail, LAN1 is a dual port RJ 45 with switch function, which port connects PLC; LAN2 is single port RJ 45 which can be connected to touch pad or upper computer system; ENET-MIT external 24VDC power supply.

2. Integrate WEB server to set device parameters and run diagnosis through the webpage; can be configured through BCDevice tool; can be configured from LAN1 or LAN2 port.

3. Implement Mitsubishi internal protocol MELSOFT connection, MELSOFT protocol can be mapping into ModbusTCP and MC (3E frame) server with LAN2 ports, and can realize ModbusTCP and MC (3E frame) protocol connection without Mitsubishi PLC.

4. Implement the NAT function to map the IP address and port number of the PLC connected to the LAN1 port to any IP and port number of the LAN2 port.

5. LAN2 port can support ModbusTCP server function and can map PLC connected by MELSOFT into ModbusTCP server of LAN2 port; the mapping relationship between Modbus and Mitsubishi PLC internal soft components can be edited freely edited.

6. LAN2 port can support MC (3E frame) protocol server function, which can map MELSOFT connected PLC into MC (3E frame) protocol server of LAN2 port, facilitating OPC to use Mitsubishi Ethernet drive function.

7. LAN2 ports can support up to 32 upper computer access.

8. Using Mitsubishi MC (3E frame) protocol or ModbusTCP, high-level language (such as VB, VC, C #, etc.) programming, realize data communication with PLC, and facilitate the development of production management system.

9. SCADA (OPC software) communicates with PLC in OPC mode.

10. Support the user side to achieve firmware update through Ethernet, provide free integrated more functional firmware, one hardware purchase, permanent upgrade.

Typical applications: